 |
||
 |
|
|
 |
 |
 |
 |
 |
|||||||
 |
|||||||||||
 |
  |
 |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
ERGOtug Transporter - Frequently Asked Questions |
||
|
|
|
 |
||||
|
|
|
|
|
 |
||
|
|
|
|
How is the ERGOtug Transporter operated? The ERGOtug Transporter is turned on with a key switch located on the handle. To go forward, press the bottom of the speed control with your thumb. The more the control is depressed the faster the ERGOtug Transporter will go. If an emergency stop is required, depress the red safety stop. To go in reverse, press the top of the speed control with your thumb. The more the control is depressed the faster the ERGOtug Transporter will go. How are the batteries charged? The batteries are charged by plugging the ERGOtug Transporter into a 110v outlet. A plug is located on the console of the ERGOtug Transporter. Open the dust cover and plug the ERGOtug Transporter into a 110v outlet using a three pronged extension cord. Charging is automatic and will stop when the batteries are fully charged. The ERGOtug Transporter has a battery life of approximately 4 hours of run time. Ideally the batteries should be recharged when 50% depleted. Depending on use, the ERGOtug Transporter may not require charging every day. There is no battery "memory" problem with the batteries supplied. What's the ERGOtug Transporter's load limit? The ERGOtug Transporter easily moves loads up to 1,600 lbs. How do I purchase an ERGOtug Transporter? To order an ERGOtug Transporter you can call us at 800-800-9274, fax us at 952-445-0231, or fill out the form on the Contact Us page. What if my question isn't answered here? Please send us your question by using the form on our Contact Us page. |
||
|
|
|
|
|
|
|
Home | Products | News | Shows | Contact Us |
||
|
|
|
|
copyright ©2009 ERGOtug, |
||||
|
1-800-800-9274 |
||||
|
www.ergotug.com |
||||
|
|
|
|
|