How is the ERGOtug EQ Mover operated?

The EQl Mover is turned on with a key switch located on the control panel. The control panel also contains a battery status meter which is illuminated while the machine is on.

To go forward, press the bottom of the green speed control with your thumb. The more the control is depressed the faster the ERGOtug EQ Mover will go. If an emergency stop is required, depress the red safety stop.

To go in reverse, press the top of the green speed control with your thumb. The more the control is depressed the faster the ERGOtug EQ Mover will go. The operator should face the ERGOtug EQ Mover when going in reverse.

Top

Is there any setup required prior to use?

Two adjustments are required on the ERGOtug EQ Mover before use:

1. The equipment being moved must be positioned on the lifting platform.

2. The strap must be pulled around the equipment being moved and secured with the buckle.

Top

How are the batteries charged?

The batteries are charged by plugging the ERGOtug EQ Mover into a 110v outlet. A plug is located on the front of the ERGOtug EQ Mover. Open the dust cover and plug the ERGOtug EQ Mover into a 110v outlet using a three pronged extension cord. Charging is automatic and will stop when the batteries are fully charged.

Top

What is the battery life?

The ERGOtug EQ Mover has a battery life of approximately 4 hours of run time. Ideally the batteries should be recharged when 50% depleted. Depending on use, the ERGOtug EQ Mover may not require charging every day.

Top

What are the ERGOtug EQ Movers' load limits?

The ERGOtug EQ Mover is capable of moving equipment weighing up to 1,000 lbs.

Top

What if my question isn't answered here?

Please send us your question by using the form on our Contact Us page.

Top

Click here for the EQ Mover Brochure (pdf)

Home | Products | News | Shows | Contact Us

copyright ©2009 ERGOtug,
a division of NuStar, Inc.

1-800-800-9274

www.ergotug.com